Schließen
Warenkorb (0)
Sie haben keine Artikel im Korb.
Filter

Universal Tow-Pro Wiring Kit

The REDARC TPWKit-013 is a 1.8m Universal Tow-Pro Wiring Kit that supports the installation of the Tow-Pro electric brake controller providing ‘Plug and Play' connectivity into a range of vehicles.

Or 4 easy payments of $52,50 with Afterpay info

Artikelnummer: TPWKIT-013
  • *
$210.00 (AUD)

The REDARC TPWKIT-013 Universal Tow-Pro Wiring Kit supports the installation of the Tow-Pro Elite electric trailer brake controller into a wide range of vehicles.

It is suitable for vehicles where the start battery, Tow-Pro main unit and the cable run to the cabin are all in-line, via a 1.8m power cable length.

The Universal Tow-Pro Wiring Kit range replaces Tow-Pro Wiring Kit range and consolidates the range from 10 kits down to 3.

The Universal Tow-Pro Wiring Kit comes with the complete range of hardware required to install a Tow-Pro Elite brake controller and contains a Wago Boot, Protection Device, Wiring Harness, Mounting Bracket and fitting instructions.

 

Old SKU

Vehicle specific wiring guide

 NEW SKU

TPWKIT-002

Colorado

TPWKIT-013

TPWKIT-004

Hilux

TPWKIT-013

 

Fortuner

 

 

Prado

 

TPWKIT-006

Isuzu

TPWKIT-013

TPWKIT-007

Kluger

TPWKIT-013

TPWKIT-009

Pajero

TPWKIT-013

 

REDARC’s new Universal range of Wiring Kits feature technology, come preinstalled with the Encapsulated Protection Device and compatible with modern driver aids such as Autonomous Emergency Braking, Adaptive Cruise Control, lane departure, collision avoidance and where the vehicle brake signal may be generated from different systems.

The standard 1m Remote Head cable that comes supplied in the Tow-Pro Elite (EBRH-ACCV3) will support the location of the remote head in the centre of the vehicle when the main unit is located around the glovebox area. If the preferred location for the remote head in these instances is on the driver’s side, you will need to purchase and fit the 2m remote head cable.

By using a REDARC Tow-Pro Wiring Kit you ensure a quick and high-quality installation of Australia’s favourite brake controller, the Tow-Pro Elite.

REDARC offer a wide range of accessories to aid and assist the install of the market-leading Tow-Pro Elite into most vehicles including Switch Inserts, Remote Head Wiring Kits and a Mounting Bracket Kit.

For technical support or any other enquiries contact our Technical Support Team on 1800 REDARC.

To view the product flyer, click here

The REDARC TPWKIT-013 Universal Tow-Pro Wiring Kit supports the installation of the Tow-Pro Elite electric trailer brake controller into a wide range of vehicles.

It is suitable for vehicles where the start battery, Tow-Pro main unit and the cable run to the cabin are all in-line, via a 1.8m power cable length.

The Universal Tow-Pro Wiring Kit range replaces Tow-Pro Wiring Kit range and consolidates the range from 10 kits down to 3.

The Universal Tow-Pro Wiring Kit comes with the complete range of hardware required to install a Tow-Pro Elite brake controller and contains a Wago Boot, Protection Device, Wiring Harness, Mounting Bracket and fitting instructions.

 

Old SKU

Vehicle specific wiring guide

 NEW SKU

TPWKIT-002

Colorado

TPWKIT-013

TPWKIT-004

Hilux

TPWKIT-013

 

Fortuner

 

 

Prado

 

TPWKIT-006

Isuzu

TPWKIT-013

TPWKIT-007

Kluger

TPWKIT-013

TPWKIT-009

Pajero

TPWKIT-013

 

REDARC’s new Universal range of Wiring Kits feature technology, come preinstalled with the Encapsulated Protection Device and compatible with modern driver aids such as Autonomous Emergency Braking, Adaptive Cruise Control, lane departure, collision avoidance and where the vehicle brake signal may be generated from different systems.

The standard 1m Remote Head cable that comes supplied in the Tow-Pro Elite (EBRH-ACCV3) will support the location of the remote head in the centre of the vehicle when the main unit is located around the glovebox area. If the preferred location for the remote head in these instances is on the driver’s side, you will need to purchase and fit the 2m remote head cable.

By using a REDARC Tow-Pro Wiring Kit you ensure a quick and high-quality installation of Australia’s favourite brake controller, the Tow-Pro Elite.

REDARC offer a wide range of accessories to aid and assist the install of the market-leading Tow-Pro Elite into most vehicles including Switch Inserts, Remote Head Wiring Kits and a Mounting Bracket Kit.

For technical support or any other enquiries contact our Technical Support Team on 1800 REDARC.

To view the product flyer, click here

Produktspezifikation
Attribute name Attribute value
Rating 12V
Weight (g) 970
Dimensions 290x290x65mm
Garantie 2 Jahre
Application EBRH-ACCV3
Available separately Vehicle-specific Switch Insert / Alternative length Remote Head Cable
Schreiben Sie Ihre eigene Bewertung
*
*
Schlecht
Sehr gut
Produktspezifikation
Attribute name Attribute value
Rating 12V
Weight (g) 970
Dimensions 290x290x65mm
Garantie 2 Jahre
Application EBRH-ACCV3
Available separately Vehicle-specific Switch Insert / Alternative length Remote Head Cable
Benutzer, die diesen Artikel gekauft haben, haben auch gekauft

Tow-Pro Elite V3 Electric Brake Controller

EBRH-ACCV3
The REDARC Tow-Pro Elite V3 Electric Trailer Brake Controller is the next generation of the award-winning Tow-Pro Elite range.
$381.00 (AUD)

2M Tow-Pro Elite Remote Head Wiring Kit

RHWK-002
The REDARC Tow-Pro Elite Remote Head Wiring Kit is a 2-metre cable that interconnects the Remote Head to the Main Unit.
$21.00 (AUD)

Tow-Pro Universal Switch Insert Panel

TPSI-001
The REDARC Universal Tow-Pro Elite Switch Insert Panel allows the installer to create an OE looking remote head mount, when a suitable switch blank is not available in the vehicle.
$14.00 (AUD)