+61 8 8322 4848
The REDARC Smart Start® SBI24 is a dual battery isolator used to isolate the start and auxiliary batteries in a dual battery system. It’s a microprocessor-controlled smart battery isolator and will protect the primary battery from a low charge in the secondary battery so it won’t drain the primary battery, while allowing the auxiliary battery to supply non-essential loads. The SBI24 provides 24 volt DC incorporating 100A of continuous ratings.
The Smart Start SBI24 battery isolator is mostly used in commercial vehicle dual battery systems, it incorporates electronic components preventing the solenoid from generating high voltage transients. It’s used instead of a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
The Smart Start SBI24 battery isolator is a safe way to charge a dual battery system.
To view product flyer, click here.
For reviews on the Smart Start Battery Isolator, watch the below
Review by Pat Calinan from 4x4 Adventure
REDARC Smart Start Dual Battery Isolator Features with Carlisle Rogers 4WD Touring Australia
The difference between a REDARC SBI & BCDC with 4WD NZ
See the correct way to mount a Smart Battery Isolator
See a basic Smart Battery Isolator install