Close
Cart
You have no items in your shopping cart.
Filters

Smart Start SBI 12V 100A

The REDARC Smart Start SBI12 100A is a 12V DC 100A microprocessor-controlled, dual battery isolator designed to protect the start battery from excessive discharge while allowing the auxiliary battery to supply charge to non-essential loads.
SKU: SBI12
$202.08 (AUD)

The REDARC Smart Start® SBI2 is a microprocessor-controlled battery isolator used in dual battery systems as a solenoid priority system. It will protect the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The SBI2 provides 12 volt DC incorporating 100A of continuous ratings.

Power Saving Technology

The battery isolator is primarily used in 4WD and commercial vehicles and incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.

The Smart Start SBI12 battery isolator is a safe way to charge a dual battery system.

Features

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected

To view product flyer, click here.

The REDARC Smart Start® SBI2 is a microprocessor-controlled battery isolator used in dual battery systems as a solenoid priority system. It will protect the start battery from excessive discharge, whilst allowing the auxiliary battery to supply non-essential loads. The SBI2 provides 12 volt DC incorporating 100A of continuous ratings.

Power Saving Technology

The battery isolator is primarily used in 4WD and commercial vehicles and incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.

The Smart Start SBI12 battery isolator is a safe way to charge a dual battery system.

Features

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected

To view product flyer, click here.

Products specifications
Input (Operating) Voltage 12VDC
Output Current Rating (Cont.) 100A
Input Fuse Rating 100A
Output Fuse Rating 100A
Warranty 2 Years
Length (mm) 80
Width (mm) 75
Height (mm) 63
Weight (kg) 0.2
Type Approval CE

For reviews on the Smart Start Battery Isolator, watch the below

Review by Pat Calinan from 4x4 AdventureĀ 

REDARC Smart Start Dual Battery Isolator Features with Carlisle Rogers 4WD Touring Australia

Write your own review
  • Bad
  • Excellent
Existing reviews
Redarc SBI12
I first installed a Redarc SBI12 dual battery isolator in my 2003 Toyota Hilux where it performed faultlessly until the car was written off (damned horses!).
Its replacement vehicle, a 2014 Isuzu Dmax was also equipped with an SBI12. THe DIY install was easily undertaken, with simple and clear instructions that DIY's of even limited experience could follow. We also installed the dual battery connect button to link the batteries if the main battery failed - this happened out bush (as it always does!) when my cranking battery dropped a cell, and had to start the car for three days by pressing the button. Ive found the SBI12's to be basic but extremely reliable and very effective in what they do. Highly recommend these units.
From: Alan | Date: 17/07/2017 8:50 AM
Was this review helpful? Yes No (2/0)
Products specifications
Input (Operating) Voltage 12VDC
Output Current Rating (Cont.) 100A
Input Fuse Rating 100A
Output Fuse Rating 100A
Warranty 2 Years
Length (mm) 80
Width (mm) 75
Height (mm) 63
Weight (kg) 0.2
Type Approval CE
Customers who bought this item also bought

350W 12V Pure Sine Wave Inverter

R-12-350RS

The REDARC 350W Pure Sine Wave Inverter produces a pure sine wave output, essential for powering 240 volt equipment, drawing power from a 12 volt battery while on the road.
$437.75 (AUD)

Tow-Pro Elite Electric Brake Controller

EBRH-ACCV2

The REDARC Tow-Pro Elite Electric Trailer Brake Controller offers two types of braking, automatic and user-controlled mode.
$371.32 (AUD)

20A Solar Regulator

SRP0240

The REDARC 20A Solar Regulator ensures that the power supplied by 12 volt or 24 volt solar panels is regulated to the right voltage to charge auxiliary batteries.
$141.36 (AUD)