How to fit a Tow-Pro Wiring Kit to a 70 Series Landcruiser

Installing a REDARC Tow-Pro Elite into a 70 Series LandCruiser

These instructions relate to the installation of the REDARC Tow-Pro Elite into a 70 Series Landcruiser using the the TPWKit-014 wiring kit.

Step 1

Locate unused grommet in front of driver - otherwise use nipple on main grommet Drivers Side.

Use supplied 16mm grommet - feed both single-core BLACK and twin-core RED/BLUE through (as indicated) and feed through.

Step 2

Fit Main Unit bracket as indicated below.

Using supplied M6 nut, secure to vehicle fixing indicated (looking through speaker location - after removal - in front of driver- right hand side of steering).

Download this tech tip as a PDF here or check the REDARC range of switch inserts and Tow-Pro accessories to find one that matches your vehicle.