-
![REDARC ROS1224]()
Roll Over Sensor ROS1224A$1,265.00The REDARC Roll Over Sensor (ROS) signals the isolation switch to disconnect power to the truck system in the event of a rollover. -
![REDARC BMIS4PPV2KIT]()
Battery Master Isolation Switch - 4PP BMIS4PPV2KITA$2,050.00The REDARC BMIS4PPV2KIT is a Battery Master Isolation Switch with positive isolation designed for heavy vehicles with dual start cables to isolate both battery circuits. -
![REDARC BMIS4PNV2KIT]()
Battery Master Isolation Switch - 4PN BMIS4PNV2KITA$2,059.00The REDARC BMIS4PNV2KIT is a Battery Master Isolation Switch with positive negative isolation designed to isolate both battery circuits. -
![REDARC BMIS-CK]()
BMIS Connector Kit BMIS-CKA$216.05The REDARC BMIS Connector Kit is designed for installation on heavy vehicles where a factory harness is not available. -
![REDARC BMIS-AP]()
BMIS Adaptor Plate BMIS-APA$111.08The REDARC BMIS Adaptor Plate is designed to retrofit the REDARC Battery Master Isolation Switch to existing installation of other brand switches.
Heavy Vehicle Safety
Maintain important OH&S standards and improve safety for your drivers and fleet with REDARC's range of Australian made heavy vehicle safety equipment.
Designed to safely isolate batteries in 12v and 24v applications, REDARC’s Battery Master Isolation Switch (BMIS) and Roll Over Sensor (ROS), have reliable performance and safety at the forefront of their design.
Maintain important OH&S standards and improve safety for your drivers and fleet with REDARC's range of Australian made heavy vehicle safety equipment.
In the event of a heavy vehicle rollover, the dangers extend beyond the initial impact as the vehicles electrical system can spark, starting fires from leaking fuel or exposed dangerous goods.
Designed to safely isolate batteries in 12v and 24v applications, REDARC’s Battery Master Isolation Switch (BMIS) and Roll Over Sensor (ROS), have reliable performance and safety at the forefront of their design.
Ensure AS2809 and ISO requirements and compliance
When utilised in unison, the BMIS and ROS enabling heavy-duty vehicles to meet AS2809 roll-over sensing requirements. The ROS works hand in hand with the BMIS to automatically shut down the vehicle’s engine and all electrics when a dangerous angle of more than 45 degrees is reached, minimising the chance of a spark.
The BMIS and ROS feature an ISO26262 rated dual redundancy system to avoid false triggering and comply with stringent industry standards including the latest Australian Dangerous Goods Standard AS2809;2020.
Protect any vehicle fleet or industry
Applications for the BMIS and ROS stretch far beyond Dangerous Goods vehicles, as any vehicle that rolls over whilst power is running has the risk of an electrical spark that could cause a fire. The BMIS and ROS are indicative of REDARC’s focus on providing safety solutions for the heavy vehicle industry in Australia and internationally.
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
NEED SOME HELP?
Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.
Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.
FIND REDARC AT LEADING RETAILERS
Copyright © 2022 REDARC. All rights reserved.