Close
FREE FREIGHT AUS LOW FIXED FREIGHT FOR INTERNATIONAL ORDERS Cart
You have no items in your shopping cart.
Filters

60A Fuse Kit

The REDARC 60A Fuse Kit is designed to provide a simple, neat fuse installation for dual battery systems.
SKU: FK60
$76.44 (AUD)

One of the most common failures the REDARC technical support team hear about with dual battery installations is a failure of the fuse/holder. This failure can result in the fuse and holder melting causing the connection to be lost and, therefore, no charging of your auxiliary battery. This situation is usually diagnosed as a blown fuse however it is more likely attributed to a poor quality fuse holder.

Poor quality fuse holders often don’t make adequate contact with the fuse which can allow dirt and dust to get in between the contact points. This causes excess heat to be generated due to the high resistance. This excess heat can be enough to melt the fuse and the holder. Even if the fuse holder doesn’t melt, you could be losing valuable charge to heat dissipation.

Redarc fuse kits use only the best quality fuses and fuse holders designed to fit the cable required for the specified current and make a solid connection, giving you peace of mind that your installation is working efficiently and safely.
Redarc offers fuse kits in 40A and 60A versions designed for BCDC installations and a 100A version designed for SBI installations.

Kit Includes:

  • 2 X Fuse Holders
  • 4 X 60A Fuses
  • Cable Crimps
  • Detailed instruction sheet

One of the most common failures the REDARC technical support team hear about with dual battery installations is a failure of the fuse/holder. This failure can result in the fuse and holder melting causing the connection to be lost and, therefore, no charging of your auxiliary battery. This situation is usually diagnosed as a blown fuse however it is more likely attributed to a poor quality fuse holder.

Poor quality fuse holders often don’t make adequate contact with the fuse which can allow dirt and dust to get in between the contact points. This causes excess heat to be generated due to the high resistance. This excess heat can be enough to melt the fuse and the holder. Even if the fuse holder doesn’t melt, you could be losing valuable charge to heat dissipation.

Redarc fuse kits use only the best quality fuses and fuse holders designed to fit the cable required for the specified current and make a solid connection, giving you peace of mind that your installation is working efficiently and safely.
Redarc offers fuse kits in 40A and 60A versions designed for BCDC installations and a 100A version designed for SBI installations.

Kit Includes:

  • 2 X Fuse Holders
  • 4 X 60A Fuses
  • Cable Crimps
  • Detailed instruction sheet
Products specifications
Rating 60A
Warranty 2 Years
Write your own review
  • Bad
  • Excellent
Products specifications
Rating 60A
Warranty 2 Years
Customers who bought this item also bought

Water or Oil Temperature Sensor - 1/8 NPT Thread

GS-OWT1-8

The REDARC Water or Oil Temperature Sensor is a coolant or oil temperature sensor with a 1/8" NTP thread that is designed to measure from -20~ + 170°C.
$52.51 (AUD)

Gauge Holder- Mounting Cup for One Gauge

GH-CUP

The REDARC mounting cup fits one REDARC 52mm Gauge.
$43.21 (AUD)

EGT & Boost Pressure 52mm Gauge

G52-EB

The REDARC 52mm G52-EB monitors exhaust gas temperature and boost pressure.
$424.31 (AUD)