Close
Cart
You have no items in your shopping cart.
Filters

Dual Input 40A In-vehicle DC Battery Charger

The REDARC BCDC1240D is a 12V 40A In-vehicle DC to DC battery charger. It features the next generation in REDARC In-vehicle charging technology, charging from Solar and DC inputs simultaneously.
SKU: BCDC1240D
$789.54 (AUD)

The REDARC BCDC1240D In-vehicle Battery Charger is the next generation in REDARC's DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D will charge from both solar and the alternator simultaneously. With built-in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1240D also comes with patented charging profiles, including a lithium charging profile. The 'Dual' input range will continue to charge all other types of batteries including AGM, GEL, standard lead acid and calcium. 

As a guide, the BCDC1240D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D

 

Proven and Tested

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.  

 

Features

  • Separate DC and solar charging inputs
  • Maximises the performance and life of your auxiliary battery
  • Simultaneous DC and solar charging with Green Power Priority
  • Suits 12V/24V standard and variable voltage/smart alternators
  • Suitable for AGM, GEL, standard lead acid, calcium and LiFePObatteries

To find out the best dual battery setup for your needs use the free REDARC Dual Battery Selector here.

 

To view product flyer, click here

The REDARC BCDC1240D In-vehicle Battery Charger is the next generation in REDARC's DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D will charge from both solar and the alternator simultaneously. With built-in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1240D also comes with patented charging profiles, including a lithium charging profile. The 'Dual' input range will continue to charge all other types of batteries including AGM, GEL, standard lead acid and calcium. 

As a guide, the BCDC1240D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D

 

Proven and Tested

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.  

 

Features

  • Separate DC and solar charging inputs
  • Maximises the performance and life of your auxiliary battery
  • Simultaneous DC and solar charging with Green Power Priority
  • Suits 12V/24V standard and variable voltage/smart alternators
  • Suitable for AGM, GEL, standard lead acid, calcium and LiFePObatteries

To find out the best dual battery setup for your needs use the free REDARC Dual Battery Selector here.

 

To view product flyer, click here

Products specifications
Input (Operating) Voltage 9 - 32VDC
Output System Voltage 12VDC
Maximum Charging Voltage 15.3V
Output Current Rating (Cont.) 40A
Input Current (Max.) 40A
Input Fuse Rating 60A
Output Fuse Rating 60A
Warranty 2 Years
Standby Current Draw <100mA
Output Power 600W
Width (mm) 120
Height (mm) 37
Type Approval CE
Length (mm) 165
Weight (kg) 0.85

For reviews on the BCDC range watch the below video

What's Up Down Under show behind the scenes of how our In-vehicle Battery Chargers are made

BCDC1225D - Dual Battery Charger Installation

Creek to Coast powered by REDARC BCDC In-Vehicle Battery Charger

 

View Shaun from 4WD Action review the BCDC1225D

 

Craig from REDARC talks about the BCDC 1225D at the Overland Roadshow

Pat Callinan, one of Australia's most trusted and respected 4WD experts, reviews the REDARC BCDC1225D

Write your own review
  • Bad
  • Excellent
Products specifications
Input (Operating) Voltage 9 - 32VDC
Output System Voltage 12VDC
Maximum Charging Voltage 15.3V
Output Current Rating (Cont.) 40A
Input Current (Max.) 40A
Input Fuse Rating 60A
Output Fuse Rating 60A
Warranty 2 Years
Standby Current Draw <100mA
Output Power 600W
Width (mm) 120
Height (mm) 37
Type Approval CE
Length (mm) 165
Weight (kg) 0.85
Customers who bought this item also bought

Dual Sensing Smart Start Battery Isolator 12V 100A

SBI12D

The REDARC Smart Start SBI12D 100A dual battery isolator enables the user to charge a 12 volt start battery from a solar panel or battery charger on the auxiliary battery.
$240.38 (AUD)

Dual Voltage 52mm Gauge with optional current display

G52-VVA

The REDARC 52mm G52-VVA dual voltage gauge measures the voltage level of up to two 12 volt batteries and enables the monitoring of charging performance of either the main or/and auxiliary battery.
$202.33 (AUD)

10m Anderson™ to Anderson™ Cable

SRC0019

The 10m Anderson™ to Anderson™ Cable connects the Solar panel to Solar regulator. It provides the option to increase the distance from the solar panel to the regulator up to 10m.
$115.00 (AUD)