Close
FREE FREIGHT AUS LOW FIXED FREIGHT FOR INTERNATIONAL ORDERS Cart
You have no items in your shopping cart.
Filters

40A In-Vehicle DC Battery Charger (Low Voltage)

The REDARC BCDC1240-LV is a 12V 40A In-vehicle DC to DC charger suitable for vehicles fitted with an ECU-controlled variable voltage alternator, features a MPPT solar regulator
SKU: BCDC1240-LV
$766.54 (AUD)
Product Files

The BCDC1240-LV is a 12 Volt 40 Amp In-vehicle DC Charger featuring technology designed to charge all major lead acid batteries to a proven 100%. It’s suitable for vehicles fitted with an ECU-controlled variable voltage alternator.

The BCDC1240-LV dual battery charger features a lower voltage setting so it can operate with variable voltage alternators.

As a guide the BCDC1240-LV is suitable for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225-LV.

With a wide operating range (9V – 32V), the DC to DC charger will charge from both 12V and 24V vehicle systems.

The BCDC DC to DC charger also features a Maximum Power Point Tracking (MPPT) solar regulator, extracting the maximum amount of power from solar panels to charge an auxiliary battery, even during low light conditions, when you’re parked.

With multiple levels of fault protection. The DC to DC battery charger will act as a dual battery isolator, should the voltage get too low, the start battery will be protected.

Proven and Tested

Compact in size, easy to install and fully sealed - water, dust and vibration are no match for the in-vehicle DC DC charger. Handling the roughest tracks in outback Australia and even deep water crossings at Cape York, the In-vehicle battery charger won’t let you down. The BCDC DC to DC battery charger is suitable for installation in harsh environments or marine applications.

With an ever increasing number of electrical accessories and devices being used when travelling around Australia, along with more complex vehicle electrical systems than seen in years gone by, having the right battery charging solution has never been more important.

Designed, built and tested in Australia for our unique conditions, the REDARC DC to DC charger is the brand you can trust.

Features

  • Multi Stage DC to DC Battery Charger
  • MPPT Solar Regulator
  • Start Battery Isolator
  • Fully sealed
  • No fan for super quiet operation
  • Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries

To view product flyer, click here.

The BCDC1240-LV is a 12 Volt 40 Amp In-vehicle DC Charger featuring technology designed to charge all major lead acid batteries to a proven 100%. It’s suitable for vehicles fitted with an ECU-controlled variable voltage alternator.

The BCDC1240-LV dual battery charger features a lower voltage setting so it can operate with variable voltage alternators.

As a guide the BCDC1240-LV is suitable for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225-LV.

With a wide operating range (9V – 32V), the DC to DC charger will charge from both 12V and 24V vehicle systems.

The BCDC DC to DC charger also features a Maximum Power Point Tracking (MPPT) solar regulator, extracting the maximum amount of power from solar panels to charge an auxiliary battery, even during low light conditions, when you’re parked.

With multiple levels of fault protection. The DC to DC battery charger will act as a dual battery isolator, should the voltage get too low, the start battery will be protected.

Proven and Tested

Compact in size, easy to install and fully sealed - water, dust and vibration are no match for the in-vehicle DC DC charger. Handling the roughest tracks in outback Australia and even deep water crossings at Cape York, the In-vehicle battery charger won’t let you down. The BCDC DC to DC battery charger is suitable for installation in harsh environments or marine applications.

With an ever increasing number of electrical accessories and devices being used when travelling around Australia, along with more complex vehicle electrical systems than seen in years gone by, having the right battery charging solution has never been more important.

Designed, built and tested in Australia for our unique conditions, the REDARC DC to DC charger is the brand you can trust.

Features

  • Multi Stage DC to DC Battery Charger
  • MPPT Solar Regulator
  • Start Battery Isolator
  • Fully sealed
  • No fan for super quiet operation
  • Charges AGM, Gel, Calcium content, VRLA and Standard Lead Acid batteries

To view product flyer, click here.

Products specifications
Input (Operating) Voltage 9 - 16VDC
Output System Voltage 12VDC
Maximum Charging Voltage 15.3V
Output Current Rating (Cont.) 40A
Input Current (Max.) 40A
Output Power 600W
Input Fuse Rating 60A
Output Fuse Rating 60A
Standby Current Draw <100mA
Length (mm) 150
Width (mm) 120
Height (mm) 37
Weight(kg) 0.68
Warranty 2 Years
Type Approval CE

For reviews on the BCDC range watch the below video.

REDARC in-vehicle battery chargers powers Pat Callinan as he films 4x4 Adventure 

 

Write your own review
  • Bad
  • Excellent
Products specifications
Input (Operating) Voltage 9 - 16VDC
Output System Voltage 12VDC
Maximum Charging Voltage 15.3V
Output Current Rating (Cont.) 40A
Input Current (Max.) 40A
Output Power 600W
Input Fuse Rating 60A
Output Fuse Rating 60A
Standby Current Draw <100mA
Length (mm) 150
Width (mm) 120
Height (mm) 37
Weight(kg) 0.68
Warranty 2 Years
Type Approval CE
Customers who bought this item also bought

60A Fuse Kit

FK60

The REDARC 60A Fuse Kit is designed to provide a simple, neat fuse installation for dual battery systems.
$76.44 (AUD)

Relay Kit

RK1260

The REDARC Relay Kit allows you to automatically switch between charging your auxiliary battery from the vehicle alternator or from your solar panel when using either a BCDC1225 or BCDC1240.
$109.22 (AUD)