Electric Brake Controllers
REDARC ELECTRONICS
ABN 77 136 785 092
23 Brodie Road North
, Lonsdale
South Australia, 5160, AUSTRALIA
Phone
+61 8 8322 4848
Fax
+61 8 8387 2889
|
|
|
| EBIAX pictured |
- Performance and Reliability -
- 2 Year Warranty - |
- Miniature solid-state controller
- EB1AX Suitable for 1 or 2 axles (12 Amp maximum) and EB3AX suitable for up to 3 axles (18 Amp maximum)
- When the vehicle brakes are applied, the trailer brakes are automatically applied by the electric brake controller
- Adjustable braking force by a finger-tip rotary control
- Brake application is smooth and progressive
- Manual push button applies the trailer brakes to the level set on the rotary control and energises the brake lights
| Part No |
CONTINUOUS POWER OUTPUT
(WATTS) | LOAD RATING
CONTINUOUS (AMPS) |
DIMENSIONS
L x W x H |
APPROX.
WEIGHT |
| EB1AX |
Electric Brake Controller,
12 V
150W 1 or 2 axles |
12A |
100mm x 50mm x 30mm |
0.2 |
| EB3AX |
Electric Brake Controller
12V
220W 1,2,3 axles |
18A |
100mm x 50mm x 30mm |
0.2 |
| BA5000 |
Trailer Break-away Controller, 12V
2 or 4 wheel axle |
Includes 12V
Battery |
330mm x 110mm x 190mm |
3.6 |
| BA5000XP |
Trailer Break-away Controller, 12V
6 wheel axle |
Includes 12V
Battery |
330mm x 210mm x 190mm |
3.6 |
| EB24A |
Combined Battery Charger / 24v Adaptor |
3A |
70mm x 135mm x 50mm |
0.5 |
| 24V Adapter / Battery Charger |
The EB24A is used to adapt a 12V electric brake controller to a 24V vehicle. It combines a battery charge equaliser together with a BL24 in a compact package. This system simplifies
wiring whilst allowing 12V power for the brake controller to be taken from the centre tap of the 24V battery bank without causing charge imbalance. |
REDARC ELECTRONICS
ABN 77 136 785 092
23 Brodie Road North, Lonsdale
South Australia, 5160, AUSTRALIA
|
 |
Phone +61 8 8322 4848
Fax +61 8 8387 2889
Email power@redarc.com.au
Web www.redarc.com.au
|
|
|
| Other REDARC Trailer Braking products include: |
BreakAway Controller
PDF: Breaksafe 5000
PDF: Breaksafe 5000 Release |
| BA5000 - 2 or 4 wheel trailers |
| BA5000XP - 6 wheel trailers |
| Trailer safety product |
| Minimises the potentially dangerous situation of trailer runaway after accidental disconnection |
| In the event of a trailer becoming disconnected the trailer brakes are immediately applied and the trailer brake lights are activated as a hazard warning |
| Monitors the condition of the trailer battery. Remote display available Part RM5000. See PDF |
| Required by law for trailers over 2 tonne |
| See below for fitting to 24 Volt vehicles |
| 24V Adaptor Charger |
| EB24A used when fitting the electronic brake controller to a 24V vehicle. PDF Tech spec refers.
|
| A 12 V feed is required for the electric brake controller while the brake voltage adaptor allows the 24V brake lights to trigger the electric brake controller operation |
| Also allows manual operation of the electric brake controller to operate the vehicle brake lights |
|
|
