Smart Start Dual Battery Isolators
REDARC ELECTRONICS
ABN 77 136 785 092
23 Brodie Road North
, Lonsdale
South Australia, 5160, AUSTRALIA
Phone
+61 8 8322 4848
Fax
+61 8 8387 2889
|
| |
Dual Battery Isolator
Plenty of serious off-roaders fit their vehicles with dual battery set-ups.
Basically, it.s good insurance against getting stuck in the bush because a battery has given up
the ghost. And push-starting a two-tonne four-wheel drive in mud isn't anybody's idea of a
good time. But even with a dual battery installation you still need to be able to isolate one battery to
protect it as your start battery. That is where the REDARC dual battery isolator comes in. The unit represents a cost-effective
solution and it's a compact device that is easy to fit. |
| PART NO | DIMENSIONS
{mm} | WEIGHT
{kg} |
VOLTAGE RANGE |
OFF VOLTS |
ON VOLTS |
MAX CONT.1 |
MAX INRUSH 1 |
| SBI12 |
75L x 55W x 80H |
0.3 |
9-15 Volts DC |
12.5 |
13.2 |
100 Amps |
400 Amps |
| SBI24 |
75L x 55W x 80H |
0.3 |
18-30 Volts DC |
25.0 |
26.4 |
100 Amps |
400 Amps |
| SBI212V |
90L x 95W x 100H |
0.8 |
9-15 Volts DC |
12.5 |
13.2 |
200 Amps |
600 Amps |
| SBI224V |
90L x 95W x 100H |
0.8 |
18-30 Volts DC |
25.0 |
26.4 |
200 Amps |
600 Amps |
REDARC ELECTRONICS
ABN 77 136 785 092
23 Brodie Road North, Lonsdale
South Australia, 5160, AUSTRALIA
|
 |
Phone +61 8 8322 4848
Fax +61 8 8387 2889
Email power@redarc.com.au
Web www.redarc.com.au
|
|
|
| Features |
| 12V DC and 24V DC with
100A & 200A continuous
rating |
| Used by 4WD clubs
around Australia |
| Compact in size and
easy to install |
| Cost effective solution |
| Protects start battery |
| Smarter than a
continuous duty
solenoid |
| Surge protected |
| |
